Tiles, as one of the most easy to create a personality home tone, is an indispensable part of the decoration process, but the decoration crowd is also troubled: is the thicker the better? What if the kitchen tiles are not waterproof? What should I do if the tiles just cracked soon? Hereby explain, let the people just need peace of mind. Precautions: 1. Clear tile type During the renovation period, the requirements for floor-to-floor tiles in different areas are different. Under normal circumstances, the living room, bedroom and other areas are not easy to receive pollution, and the area is large, the polished tiles can be selected according to the overall style of decoration and personal preference; while the balcony, kitchen, bathroom and other areas are exposed to oil stains, stains, and waste water. Therefore, choose matt tiles that are non-slip and not easy to leak. 2. Check the appearance of the tile When purchasing tiles, you should carefully observe the flatness, wear resistance and obvious color difference of the tiles. You can measure two tiles of the same size and color with a ruler for comparison. At the same time, you can ask the merchant to check the product's wear resistance test report. 3. Pay attention to the tile size Floor tiles are usually used in sizes of 300 to 600 mm. Kitchens and bathrooms with relatively small areas can use tiles of about 300 to 400 mm to reduce the waste caused by tile cutting at the corners. 500 to 600mm tiles can be purchased in the living room of about 25 square meters. 4. Consulting after-sales service Before buying, be sure to know the details of the tile warranty period, whether it is delivered to your door, whether you are giving a grout. Acceptance should be accepted at the time of receipt, and the number of tiles should be counted. Purchase misunderstanding 1. The bigger the tile thickness, the better? Tile thickness does not represent quality. Excessive thickness may result in improper cementing and lowering of the floor height. 2. The lower the water absorption rate of the tile, the better? The national standard for water absorption for commonly used porcelain tiles is 0.5% or less. If the water absorption rate is too low, the cement will not stick firmly and the floor will be loose; on the contrary, it will be easily cracked. 3. The higher the wear resistance of the tile, the better? The wear resistance of the tiles is divided into five grades according to technical specifications. Class I tiles have the lowest wear rate and are generally used for wall surfaces; Grade II tiles are mainly used in bathrooms, bedrooms, etc. without hard rubbing; III tiles are suitable for living rooms, kitchens, etc.; Tiles are highly abrasion resistant and are ideal for use in the foyer, hallways and public spaces of luxury homes; V degrees are generally used in non-domestic environments. Fridge Deodorizer,Charcoal Odor Eliminating Gel,Activated Refrigerator Deodorizer,Charcoal Deodorant Comebest , https://www.comebest.com
